General Category > Quadrajet Carb Talk and Tips

Thanks, Cliff!

(1/1)

daveo76:
I just wanted to say thanks to Cliff for the great book and the great advice on this forum!  I just got my '76 Corvette back on the road after rebuilding the motor and an Edelbrock 1903 Q-Jet that I built with Cliff's book and kit.  It runs perfect with no issues and what little tuning needed has been very easy.  Set the idle screws at 3 turns out initially and that seems to be about right.  I do plan to do some vacuum gauge tuning, but it ran great without it tonight when I took it out on the road for the first time.  Initial timing is somewhere around 12 to 14, might be able to go a little bit further - no pinging noticeable.  Pretty excited and now I feel like I can say I've successfully put together my first Q-jet.  Thanks for the great help!

Cliff Ruggles:
You are most welcome!....Cliff

Navigation

[0] Message Index