Author Topic: accelerator pump shaft.  (Read 2511 times)

Offline omaha

  • Jet Head
  • ****
  • Posts: 391
accelerator pump shaft.
« on: May 09, 2009, 10:16:13 PM »
I have a question regarding the accelerator pump. How much "slop" can exsist where the shaft exits the carb body? Does it matter if there is some wear?  Any method to bush or seal?  Thanks .

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5418
Re: accelerator pump shaft.
« Reply #1 on: May 13, 2009, 06:34:10 AM »
Some units will show considerable wear in the airhorn from the pump shaft.  Late model units used an insert to help reduce wear.  We can install an insert in early model airhorns but have only had to do this for extremely worn units.  They will usually be fine with some play in that area.....Cliff