General Category > Quadrajet Carb Talk and Tips

Carb Cleaner Parts Dipper ?

(1/2) > >>

PMD1969:
B-12 and NAPA have a gallon can with a mesh bucket strainer.  Anyone know if a QuadraJet will fit in this?  I am guess ing I might need something bigger.

Thoughts?

Ethan1:
 You can probably fit the linkage, shafts and smaller parts in there, but not the carb itself. :(

PMD1969:

--- Quote from: Ethan1 on November 27, 2012, 12:50:08 PM --- You can probably fit the linkage, shafts and smaller parts in there, but not the carb itself. :(

--- End quote ---

thanks.  Is Berryman okay to use? 

http://www.amazon.com/PARTS-CLEANER-WITH-BASKET-GALLON/dp/B0002KKIIC

Ethan1:
 Berryman is ok to use, but the last time I used it, I wasn't impressed. They have taken some of the active cleaners out of it, so it doesn't do as well as it used to. Maybe it's changed? I like to use the gallon bottle of Castrol Super Clean. Just don't let it sit in there too long, or it will start eating the plating off the throttle plates.

PMD1969:

--- Quote from: Ethan1 on November 27, 2012, 05:54:25 PM --- Berryman is ok to use, but the last time I used it, I wasn't impressed. They have taken some of the active cleaners out of it, so it doesn't do as well as it used to. Maybe it's changed? I like to use the gallon bottle of Castrol Super Clean. Just don't let it sit in there too long, or it will start eating the plating off the throttle plates.

--- End quote ---

Thanks.  Someone mentioned that there were two different Berryman solutions for carb cleaner.  Too many options.  I think I might try the NAPA stuff and just get on with life.

Navigation

[0] Message Index

[#] Next page