« previous next »
Pages: 1 [2]   Go Down

Author Topic: Going to take apart what I just bought  (Read 5904 times)

Offline AZracer

  • Garage guy
  • **
  • Posts: 14
Re: Going to take apart what I just bought
« Reply #15 on: February 26, 2013, 03:11:52 PM »
OK Cliff I drilled an upper idle bleed .050 and made the main bleed in the air horn .070  It idles great now and the idle screws respond also. Starts right up without touching the gas!!!  One thing I did see is this air horn has 6 tubes I think that is that main POE. Not sure that will make any difference.

Pat
Logged

Offline omaha

  • Jet Head
  • ****
  • Posts: 391
Re: Going to take apart what I just bought
« Reply #16 on: February 27, 2013, 08:29:00 PM »
     Pull over enrichment if you have 6 tubes. (POE not really needed).
Logged

Offline AZracer

  • Garage guy
  • **
  • Posts: 14
Re: Going to take apart what I just bought
« Reply #17 on: February 28, 2013, 05:53:50 PM »
Thanks for responding Omaha. My question is do I need to change the main metering jets because it has those extra tubes? 

Pat
Logged

Offline AZracer

  • Garage guy
  • **
  • Posts: 14
Re: Going to take apart what I just bought
« Reply #18 on: February 28, 2013, 06:02:50 PM »
One more thing it is an Olsmoblile air horn on a Pontiac main body so would the POE work anyway???

Pat
Logged
Pages: 1 [2]   Go Up
« previous next »