« previous next »
Pages: [1]   Go Down

Author Topic: 850 CFM Edelbrock 1910 carburetor  (Read 2370 times)

Offline runningman

  • Newbie
  • *
  • Posts: 1
850 CFM Edelbrock 1910 carburetor
« on: March 22, 2013, 08:48:15 AM »
Hi - I have an Edelbrock 1910 carb which has a side fuel inlet in my stock 67 GTO. It has a 2" internal paper fuel filter with check valve. I'm re-doing the fuel line for a more stock appearance and want to use a 90 degree banjo fitting to have the inlet come out towards the front of the car. Problem is the 2" filter is now too long (banjo fitting does not have as deep cbore for the filter as the straight fitting does) and I need to use a 1" long filter.

Question is will the shorter filter have any negative impact? Anyone have an idea? Thanks!
Logged

Offline 429bbf

  • Qjet Hero
  • *****
  • Posts: 539
Re: 850 CFM Edelbrock 1910 carburetor
« Reply #1 on: March 22, 2013, 08:04:08 PM »
welcome aboard. from my experience the filter will work just fine. i can't remember the math but a 90 degree corner would be way more restriction than the fuel filter will ever give you .fwiw
Logged

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5432
Re: 850 CFM Edelbrock 1910 carburetor
« Reply #2 on: March 23, 2013, 07:01:55 AM »
Never tried that particular fitting, but I would try to fit the Marine filter in there.  It is slightly longer than the short paper filter, and flows much better.  We have them in stock....Cliff
Logged
Pages: [1]   Go Up
« previous next »