Quadrajet Problem Solving > Quadrajet Parts and Numbers

Help With Part # to Rebuild

(1/2) > >>

Monte71:
Hi Guys

New to the forum,looks like lots of knowledge around here.

I have a 1971 Monte Carlo,SS454 car,that i purchased last July.

Right now it has a Holly 850 dp on it,with manual choke(not hooked up) sitting on a Edelbrock Performer 2.0 intake.

My question is,can you suggest a 76 or later Q-jet part number (with electric choke ) that would work?

I could use original p/n 7041200,but it uses the divorced choke setup with the linkage mounted on the manifold(not sure if this would work properly with my intake) I would prefer electric.

Thanks-Shawn

Shark Racer:
Any of the Chevy car carbs should be fine. Corvette, Camaro, etc.

What's the P/N on the intake? If it doesn't have the divorced choke box a 4MV will not work.

Any M4MC can be converted to electric choke w/ the choke kit from Cliff.

Monte71:
Found a 17082213,

What do you guys think?

Shawn

Shark Racer:
I'd use it :)

omaha:
...YYUUUUUUPP.....I think good choice also..

Navigation

[0] Message Index

[#] Next page