Quadrajet Problem Solving > Diagnose a Quadrajet carburetor problem

Finally finishing up ...Just some fine points please

(1/1)

bobsessed:
After a few problems that you guys so graciously helped with, I'm about to get this carb back on my GS.  Just need a little more help.
1.  Do I use the tiny hanger wire on the needle valve?
2.  Should I use loctite on the 9 assembly screws holding the carb together?
3. When installed, how much "travel" is normal for the power piston? This one, ('70 Buick GS 350, carb # 7040244) has about 1/4", maybe 5/16".   Thanks again All....

429bbf:
bob. 1.leave the hanger off if you like your choice
2.i use anti sieze .i want to get the carb back apart some day
3 .i cant answer that never had a 7040244 apart . but im sure somebody can help you.

bobsessed:
I just wanted to Thank Cliff and all of you that helped me get this thing together. I put the carb on today, and as soon as the fuel made its way in she fired up and ran beautifully.....I'm completely stoked and can;t wait to get it all "dialed in". Thanks again!!!

Cliff Ruggles:
Good news, let us know if we can be of further assistance....Cliff

Navigation

[0] Message Index