General Category > Quadrajet Carb Talk and Tips

One of those @#%!#%^ days

(1/3) > >>

Shark Racer:
I'm finishing off a carb for a friend and couldn't get the secondaries to hit 90. (They were stopping at about 66*).

Bent the linkage and they'd get a bit further. Bend it a bit more and it wouldn't go as far. ?!?!

After an hour and a half of playing with it and feeling like a complete dumb-dumb, I got tired of listening to the secondary shaft squeek and idly sprayed it with some of my gun CLP. Worked the secondaries to work the solvent in... and they went 110*.

SON OF A...

...


I quit!

Re-adjusted the linkage and bent the secondary "stop" link a bit and now we have 90/90 on both. Throttle body is all one piece now, and the main body and air horn will get assembled tomorrow and thrown on the car tomorrow afternoon.

I'm going to stop doing these for people pretty soon, I think. I'm beat.

429bbf:
youll have that on the (big jobs ) i cant leave anything alone.im pulling the front pull off shafts out of junk carbs and installing them in carbs that had the rear pulloff that way i only have to deal with one pulloff. problem is im building aluminum blocks with setscrews to mount to the airhorn and it just takes time.fwiw

Shark Racer:
This thing has fought me every step of the way. The last guy who worked on it was a real ... nevermind!

This is what it looked like when it came in:


I started getting nervous when I saw this:


After some soda love:


Almost cried when I look at the first pic and this one back to back:


The power piston came out with a fight, primary throttle blade screws had NOTHING to grab onto (had to drill one of them out), airhorn was stuck on pretty good, secondary throttle shaft was decently seized... ugh.

I'm on a QJet vacation for a while!

429bbf:
NICE JOB i dont finish a carb like that i just clean them and put back together. im going to try something new(im going to heat one up about 400 and dip it in oil.clean for some and dirty for another look.

hunter55:
Shark, that looks almost exactly like one I just finished for my wife's 68 firebird using
My new copycad plating system.  I plated the main body and air horn and with a very
Short time in the chromate they came out the same color as yours.  I dipped the choke housing in the chromate
Without plating it and it turned out dark brown just like yours.  I did glass bead it again
And shot a little clearcoat on it to suit my taste better though. Anyway I'm very pleased
With the plating system and just started tearing down another carb I got from OMAHA
to keep feeding my quadrajet addiction.  I've been running an edlebrock carb on my 67
GTO but not for long now.

Navigation

[0] Message Index

[#] Next page