General Category > Quadrajet Carb Talk and Tips

I messed up my atp screw

<< < (2/2)

hunter55:
I'm working on a 7044202 with the same type of apt that I want to get access to.  Can the plug be drilled
And pulled with a screw or is the standard procedure to just drill it the same size as the hole it is plugging?

429bbf:
you can drill it and pull it like your saying.ive got some nice base plates laying around that ive already pulled and took the screw out . heat and a little canning wax takes them out pretty easy.

spluhar:
I was able to get the screw out by grinding a new slot.  The slot was ground into the edge of the baseplate too.

Ethan1:

--- Quote from: spluhar on September 19, 2013, 12:10:03 PM ---I was able to get the screw out by grinding a new slot.  The slot was ground into the edge of the baseplate too.

--- End quote ---

 Glad you got it out. :)

Navigation

[0] Message Index

[*] Previous page