Quadrajet Problem Solving > Diagnose a Quadrajet carburetor problem

Rich idle

<< < (2/4) > >>

kenn:
Sorry I forgot the heart, Its  a comp XE268H-110   224/231   LS 110

 I think the bleed is size is ok.  I'll call cliff to see if he has these.

 Thanks Again.  K.E.N.

Cliff Ruggles:
We sell drive in or screw in airbleeds for that purpose.  The casting can be tapped for the screw in bleeds, well worth the effort if you are in to custom tuning and want to make changes easy.....Cliff

kenn:
Sorry this took so long but I have not even started back on the truck yet.
 
 Thanks cliff ,after seeing your reply I remembered that I have a pair of the bleeds that I bought from you earlyer. I will not go to large to start with this time.

 Thanks Again.  K.E.N.

kenn:
Hello, I removed the restrictions and installed the new ones but have not started the truck.
  A note about the restriction passage, I found it to be tapered as it went down?

Cliff Ruggles:
This was done so the factory down channel restrictions stopped and were tight in the casting just below the upper idle airbleeds....Cliff

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version