« previous next »
Pages: [1]   Go Down

Author Topic: adj. screw for choke flap setting  (Read 1521 times)

Offline bober

  • Carb lover
  • ***
  • Posts: 114
adj. screw for choke flap setting
« on: December 21, 2013, 06:42:14 PM »
17080272 carb E/choke screw adj. starting point and correct procedure to adjust ? 76 Pont 350 eng. E/b intake .Thanks
Logged

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5418
Re: adj. screw for choke flap setting
« Reply #1 on: December 26, 2013, 03:53:39 AM »
Compress the primary pull-off and adjust the choke flap so it opens about 1/4" or so. 

The e-choke is set so that it just closes the choke flap. 

Fast idle speed will need to be set on cold start-up, while fine tuning the choke flap angle....Cliff
Logged
Pages: [1]   Go Up
« previous next »