General Category > Quadrajet Carb Talk and Tips

adj. screw for choke flap setting

(1/1)

bober:
17080272 carb E/choke screw adj. starting point and correct procedure to adjust ? 76 Pont 350 eng. E/b intake .Thanks

Cliff Ruggles:
Compress the primary pull-off and adjust the choke flap so it opens about 1/4" or so. 

The e-choke is set so that it just closes the choke flap. 

Fast idle speed will need to be set on cold start-up, while fine tuning the choke flap angle....Cliff

Navigation

[0] Message Index