General Category > Quadrajet Carb Talk and Tips

adjustable secondary air bleed?

<< < (2/2)

novadude:
Thanks, Cliff.  I actually grabbed this one from a boneyard for parts from a '85 Step Van (think commercial bakery truck), so it's probably the same chassis as a motorhome.  I never saw anything like this before, but it does look like it would be easy to block off this air passage.  I do see what you mean about the casting protrusions in the secondary bores in main body.

Guess I'll keep this one for parts (the original plan).  I needed a base plate to replace a cracked one on an otherwise nice Edelbrock 1903.  Baseplate is the same casting number, and appears to have all the right vacuum passages that I would need.  Idle transfer slots are a bit longer than others I've seen but that's probably not a big deal (per you answer to my earlier question).

Cliff Ruggles:
I typically avoid the motor home units for any sort of high performance use, at least until I use up everything else around here.....Cliff

Navigation

[0] Message Index

[*] Previous page