General Category > Quadrajet Carb Talk and Tips

Rochester Quadrajet 17058471 I D

(1/2) > >>

frs:
Asking about this carb# 17058471.its application,and would this be a good platform to use on a 454, auto,500 to 600 hp street and strip car ,base upon a stock appearing car ,and if not what number,or model,carb,would you recommend,also must be a side inlet.Thanks.

Ethan1:

--- Quote from: frs on March 23, 2014, 08:25:11 PM ---Asking about this carb# 17058471.its application,and would this be a good platform to use on a 454, auto,500 to 600 hp street and strip car ,base upon a stock appearing car ,and if not what number,or model,carb,would you recommend,also must be a side inlet.Thanks.

--- End quote ---

 Welcome to CHP!

 Can you post a photo of the carb and carb number?

Ethan1:
Never mind, found it. It is a Holley Remanufactured carb. It was for a '78 Cadillac DeVille 425cid, Federal, A/T, M4ME carb.

frs:
Thank you Ethan1 for the info,and your time,my question is about it being a holley remain,this carb,doses not appear to be of a remain,it looks untouched looks like a new one, but dose appear to look like a cad,carb,and would holley re stamp,the carb?That dose not appear to be the case.

Here's a few pics. Thank you.

Ethan1:

--- Quote from: frs on March 27, 2014, 05:15:12 PM ---Thank you Ethan1 for the info,and your time,my question is about it being a holley remain,this carb,doses not appear to be of a remain,it looks untouched looks like a new one, but dose appear to look like a cad,carb,and would holley re stamp,the carb?That dose not appear to be the case.

Here's a few pics. Thank you.

--- End quote ---

 Just going by my manual. It may not be a Holley Reman, but is definitely some sort of replacement. From other Holley Remans, the stamp looks like yours. Not perfect like Rochester did from the factory. Probably not a good carb to start with.

Navigation

[0] Message Index

[#] Next page