General Category > Quadrajet Carb Talk and Tips

Need advice on 7028213 carb

<< < (2/2)

Cliff Ruggles:
We talked about the specifics by phone, never heard any more about the upgrades or if it was working any better?....Cliff

Mr.Pontiac:
I can understand the frustration you must fill sometimes, i called you got what info i needed and helped on his carb. gentleman go,s and orders one from jet performance???What can i say???He will compare both or so he says??? Only getting 10 inches vacum max at idle with the jet carb.Timing is set at 12 tdc minute he advances it motor dies??I made a suggestion that i thought he put cam in wrong position?? Any ideas would be helpfull, please

Cliff Ruggles:
Those things happen, simply troubleshooting by buying parts.  A correct calibrated original carb would be better than any "generic" unit purchased. 

I just spent quite a bit of time trying to help out a customer, and it turns out the Accel distributor he had purchased was defective.  He installed a new MSD read to run unit, and the problems went away.....Cliff

Navigation

[0] Message Index

[*] Previous page