Quadrajet Problem Solving > Diagnose a Quadrajet carburetor problem

Vacuum leak at idle, hard start

<< < (2/2)

Cliff Ruggles:
Very, very little light when they are fully seated/closed and correctly adjusted....Cliff

W30Olds:
Ok, what about these defects in the main body? The first one is a hole through the first wall of the casting, right after the baffle, the other side of the secondary isnt touched. You think any of these are causing a leak?

Cliff Ruggles:
Can't really tell by the pics as they are out of focus slightly.  The top pic wouldn't produce a vacuum leak, not sure about the bottom pic?....Cliff

Navigation

[0] Message Index

[*] Previous page