General Category > Quadrajet Carb Talk and Tips

Secondary's going lean

<< < (2/2)

74zz430:
The only other thing that I could think of would be a restriction in the secondary transfer passages where the fuel goes down and out of the float bowl and then back up into secondary feed passages. It appears to access these passages I will need to remove the secondary well plugs. Does anyone know the correct diameter for these passages?

Cliff Ruggles:
There is plenty of room in that area, but it never hurts to pull the plugs and make sure there isn't any varnish, debris of any other obstruction in that area....Cliff

Navigation

[0] Message Index

[*] Previous page