« previous next »
Pages: [1]   Go Down

Author Topic: Edelbrock 1910 Main Air Bleed Size...  (Read 2120 times)

Offline firefox3

  • Garage guy
  • **
  • Posts: 23
Edelbrock 1910 Main Air Bleed Size...
« on: July 19, 2014, 07:49:00 PM »
Can someone tell me what size main air bleed the Edelbrock 1910 came with?

Thanks...
Logged

Offline novadude

  • Carb lover
  • ***
  • Posts: 87
Re: Edelbrock 1910 Main Air Bleed Size...
« Reply #1 on: July 31, 2014, 06:41:08 PM »
Might be in Cliff's book, but as I recall, mine was 0.046", and it came with small 72 jets to match the small bleeds.
Logged

Offline firefox3

  • Garage guy
  • **
  • Posts: 23
Re: Edelbrock 1910 Main Air Bleed Size...
« Reply #2 on: August 01, 2014, 07:49:10 PM »
I was thinking they were less than .050", but wasn't sure.

Thanks novadude...
Logged

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5418
Re: Edelbrock 1910 Main Air Bleed Size...
« Reply #3 on: August 08, 2014, 04:29:07 AM »
Correct, they are close to .046".  Edelbrock typically use 74 main jets in those carburetors, but the rest of the calibration was all over the place.  I've seen at least 4 completely different set-ups with the 1910's, so you never know what you are going to find with them....Cliff
Logged
Pages: [1]   Go Up
« previous next »