General Category > Quadrajet Carb Talk and Tips
motorcraft 4350/Qjet adapter
429bbf:
frank i ordered on of those adapters. I'm going to see what it takes to make a quad fit. one of my buddies at work has the same manifold and wants to install a quad. I've got access to one of the best machine shops in the state. its a 1/2 mile from my house and the guys lets me use his machines. ill let you know how it turns out. thanks for your help.
Frank400:
Great ! let me know what you find out ! Frank.
429bbf:
got my adapter . its going to take a little( mechanic engineering) to make it work. looks like if i move the carb ahead and drill new holes in the hear of the quad baseplate the gasket will seal in the middle . them its going to take some severe effort with a carbide cutter to make room for the throttle to open the plates all the way.i might just go make me a new one out of a blank piece of aluminum.ill keep you posted its going to take a while don't have time to screw around with it right now.
Frank400:
Ok, just make sure to take some pics ! Thanks again,
Frank.
Navigation
[0] Message Index
[*] Previous page
Go to full version