« previous next »
Pages: [1]   Go Down

Author Topic: Secondary Metering Question  (Read 2630 times)

Offline WhiteC3

  • Garage guy
  • **
  • Posts: 7
Secondary Metering Question
« on: November 18, 2009, 06:20:13 PM »
I have a 1976 Q-jet Carb I am planning on installing on my '81 Corvette. This carb has been rejetted for another application. I'm changing it back to stock jetting. My question is the secondary rods needed are CH,are the seats in bottom of carb all the same or will I need to change them?
Logged

Offline 77cruiser

  • Qjet Hero
  • *****
  • Posts: 625
Re: Secondary Metering Question
« Reply #1 on: November 18, 2009, 09:43:05 PM »
They are all the same on the secondaries only the rods & hangers are different.
Logged
Jim

Offline WhiteC3

  • Garage guy
  • **
  • Posts: 7
Re: Secondary Metering Question
« Reply #2 on: November 19, 2009, 06:30:45 AM »
Quote from: 77cruiser on November 18, 2009, 09:43:05 PM
They are all the same on the secondaries only the rods & hangers are different.

Thanks thats what I thought, just wanted to make sure.
Logged
Pages: [1]   Go Up
« previous next »