« previous next »
Pages: [1]   Go Down

Author Topic: fast idle working backwards?? advice???  (Read 1829 times)

Offline Mr.Pontiac

  • Qjet Hero
  • *****
  • Posts: 544
fast idle working backwards?? advice???
« on: March 25, 2015, 01:27:53 PM »
When choke is closed and first starting up the idle is very slow and after choke(divorced style) warms up and choke plate opens the car idles very fast??? Any ideas???
Logged

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5418
Re: fast idle working backwards?? advice???
« Reply #1 on: March 27, 2015, 02:56:17 AM »
Adjust the choke pull-off so it runs better cold, probably too rich or too lean initial start-up....Cliff
Logged

Offline Mr.Pontiac

  • Qjet Hero
  • *****
  • Posts: 544
Re: fast idle working backwards?? advice???
« Reply #2 on: March 28, 2015, 06:53:28 AM »
What seems to be happening is at idle car idles fine at 850 rpm,s minute car is warmed up and move throttle at all when choke is open it jumps to 1500 rpm,s and stays there. Still in choke pull-off area???
Logged

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5418
Re: fast idle working backwards?? advice???
« Reply #3 on: March 29, 2015, 02:44:48 PM »
Is the choke raising the fast idle cam when this happens?..
Logged

Offline Mr.Pontiac

  • Qjet Hero
  • *****
  • Posts: 544
Re: fast idle working backwards?? advice???
« Reply #4 on: March 30, 2015, 10:15:19 AM »
yes it is, forgive me i am corresponding with owner day by day, Thank You.
Logged

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5418
Re: fast idle working backwards?? advice???
« Reply #5 on: April 08, 2015, 04:31:15 AM »
The fast idle cam increases engine speed, when it drops out, the curb idle screw takes over.  Pretty simple set-up....Cliff
Logged
Pages: [1]   Go Up
« previous next »