General Category > Quadrajet Carb Talk and Tips

Removing outer boosters

(1/1)

77cruiser:
I have a carb from a Cad. & it's got the aux. power system & aneroid valve, so I was going to try & set it up by removing the outer booster rings.
Where would I expect to star with jetting, I think I'm going to try it on the jets only, maybe both ways I don't know.
But it does have the primary POE system so that's something else too.
Just something to try, might be a waste of time but that's what this hobby is for right?

Cliff Ruggles:
Not enough information. 

Are removing the aux pp?

Stock airlbeed sizes?

Using or not using the primary POE?

77cruiser:
Was thinking of blocking the aux. PP.
Probably stock sized bleeds or should they be smaller to help the primaries to start up sooner?
If there's an advantage to use the POE.

Cliff Ruggles:
No advantage using APT for that type of project.  I'd leave the airbleeds at the smaller sizes.....Cliff

Navigation

[0] Message Index