General Category > Quadrajet Carb Talk and Tips
A/N fitting into fuel inlet nut?
fussfeld:
What type of A/N fitting can go into the fuel inlet nut? i also noticed pictures of this on pages 44 and 88 in the book.
Ethan1:
--- Quote from: fussfeld on January 10, 2016, 07:07:24 AM ---What type of A/N fitting can go into the fuel inlet nut? i also noticed pictures of this on pages 44 and 88 in the book.
--- End quote ---
What year carb are we talking about here? There are several A/N fittings to choose from. Both 7/8" and 1". Cliff might even carry them. Might give him a call.
fussfeld:
It's actually a 2G and i think i found something that will work for either a 2G or quadrajet:
http://www.summitracing.com/parts/rus-640380/reviews/
i need something that will screw into the STOCK fuel inlet nut, not the actual fuel bowl. This is because the A/N fuel inlet going directly into the bowl for a 2G won't allow me to use the stock fuel filter. However, the A/N fuel inlet for a quadrajet WILL allow the use of a stock filter.
Ethan1:
--- Quote from: fussfeld on January 10, 2016, 09:11:51 AM ---It's actually a 2G and i think i found something that will work for either a 2G or quadrajet:
http://www.summitracing.com/parts/rus-640380/reviews/
i need something that will screw into the STOCK fuel inlet nut, not the actual fuel bowl. This is because the A/N fuel inlet going directly into the bowl for a 2G won't allow me to use the stock fuel filter. However, the A/N fuel inlet for a quadrajet WILL allow the use of a stock filter.
--- End quote ---
Yep, that should work. I assume you are using -6 A/N line then?
Cliff Ruggles:
We drill and tap the fuel filter housings for NPT threads, then you can install any AN fitting that you want.....Cliff
Navigation
[0] Message Index
[#] Next page
Go to full version