Help on sizes of rods and jet size for CCC Quadrajet carb

[AspenW41]

Cliff,
   I have a 1986 Pontiac Firebird w/a LG4. I put on a Edelbrock Intake, and a set of headers, along with a single 3" exhaust (w/ Holley crossflow muffler), AND replaced the OEM cam (179 @.050s) with a COMP CAM 260H (212@.050s), also with a 50K volt coil with a plug gapp off .055s. I am looking to rebuild the CCC carb. I was looking at your HP kit, and I wanted to know what rod and jet sizes would you recommend to get for this car.

[Cliff Ruggles]

When you get time call the shop, we'll get what you need in a custom kit exactly for what you are doing....tks....Cliff

[AspenW41]

Cliff,
   I just called. Got your answering machine. I wanted to get a Quote on how much the jets and metering rods would be from you, in addition to SR kit. 

[Cliff Ruggles]

The primary side jets and metering rods are not replaced in those unit, part throttle A/F is controlled by the M/C solenoid.

Secondary metering is not computer controlled, and it will need richer metering rods for what you are doing.  Call volume was heavy yesterday, I'll be returning all calls sometime today......Cliff