General Category > Quadrajet Carb Talk and Tips

17057274 info needed

<< < (2/2)

blazer74:
Make sure you measured the inner hole and not the outer hole at  the POE discharge ports.

Frank400:
Yes it is the inner hole.

Cliff Ruggles:
They will be fine, that carb needs very little help anyplace, aside from good parts and slight recalibration for the application.  I use the same part number on my own engine, stock aside from recalibration, quick release pull-off, and I converted it to E-choke.

https://www.youtube.com/watch?v=6zVdoLR-VzM

Navigation

[0] Message Index

[*] Previous page