General Category > Quadrajet Carb Talk and Tips

Duplicating the teflon green plating.

(1/2) > >>

Spudboy:
  Is there any way a home restorer can duplicate the Teflon green plating that came on so many of the Q-jets. What have the forum members tried?

Ethan1:

--- Quote from: Spudboy on June 06, 2016, 05:38:39 PM ---  Is there any way a home restorer can duplicate the Teflon green plating that came on so many of the Q-jets. What have the forum members tried?

--- End quote ---

 It is more of a coating, than a plating. ;)

 I believe Caswell sells a Olive Drab solution system. Never tried it though.

 https://www.caswellplating.com/electroplating-anodizing/zinc-plating-kits/chromates/olive-drab-green-chromate-makes-2-gal.html

Ethan1:
 May also try some Olive Drab military paint. Probably could get some on eBay. Best you can do without plating or the new Teflon coating, sadly.

Ethan1:
 And guns.......It is about as close and good as you are going to get.

 http://www.brownells.com/gunsmith-tools-supplies/metal-prep-coloring/paint-finishes/bake-on-aerosol-paints/teflon-moly-oven-cure-gun-finish-prod1145.aspx

Mr.Pontiac:
I bought the kit , tryed it 3 times no go!! Yellow works perfect. Green no luck!!

Navigation

[0] Message Index

[#] Next page