Quadrajet Problem Solving > Diagnose a Quadrajet carburetor problem

lean spot when coming into the secondaries

<< < (4/4)

Marx3:
Can't remember. Stock for the carb.
Bent it slightly to get a safer wot AFR with CH rods. ( AFR right around 12.5:1)

Marx3:
J hanger.
Unsure if they are in fact CH's. They have long .052 tips.
I put in some other rods, about the same tip size, but with a shorter tip and with a longer tapered portion. AFR showed 10:1 at wot, so I gotta do some tweaking. I'll measure AFR to see if that lean spot is still there with these new rods.

Navigation

[0] Message Index

[*] Previous page