Author Topic: Help! 1968 Pontiac Rochester  (Read 3693 times)

Offline unruhjonny

  • Carb lover
  • ***
  • Posts: 87
Help! 1968 Pontiac Rochester
« on: February 11, 2017, 10:03:37 PM »
I picked up a "core" carb today;
It's a 7028268.
It's missing the correct choke parts (had buick stuff in place);
Can anyone give me pictures of the 100% correct parts?

Also, where is the date code supposed to be on 1968 Quadrajets?
I am more familiar with 1969-1978 carbs...

Offline Ethan1

  • Moderator
  • Qjet Hero
  • *****
  • Posts: 1148
Re: Help! 1968 Pontiac Rochester
« Reply #1 on: February 12, 2017, 04:11:58 AM »
I picked up a "core" carb today;
It's a 7028268.
It's missing the correct choke parts (had buick stuff in place);
Can anyone give me pictures of the 100% correct parts?

Also, where is the date code supposed to be on 1968 Quadrajets?
I am more familiar with 1969-1978 carbs...

 The date code can be in one-of-two places. Stamped on the ledge, after the part number OR stamped on the baseplate just below the ledge.

 Here is a link http://picclick.ca/1968-Pontiac-400-428-Quadrajet-Carburetor-Carb-7028268-381823536112.html#&gid=1&pid=4 to a page with a photo of the choke. Hopefully it helps.

 Ethan

 
Ethan

1972 Chevelle

(oo______oo)

Offline unruhjonny

  • Carb lover
  • ***
  • Posts: 87
Re: Help! 1968 Pontiac Rochester
« Reply #2 on: February 12, 2017, 09:38:40 AM »
Thanks for telling me where to find the date stamp Ethan!
My focus is & has been on 1970 Pontiac carbs;
Up to yesterday, I have only one (original, not service replacement) 1969 carb, and one service replacement 1968 (RA) carb;
I have seen and looked at 67-68 carbs, but since they are not my focus I haven't taken the time to observe differences and I haven't run a cross any that I felt were below value...

Offline Ethan1

  • Moderator
  • Qjet Hero
  • *****
  • Posts: 1148
Re: Help! 1968 Pontiac Rochester
« Reply #3 on: February 12, 2017, 02:46:08 PM »
Thanks for telling me where to find the date stamp Ethan!
My focus is & has been on 1970 Pontiac carbs;
Up to yesterday, I have only one (original, not service replacement) 1969 carb, and one service replacement 1968 (RA) carb;
I have seen and looked at 67-68 carbs, but since they are not my focus I haven't taken the time to observe differences and I haven't run a cross any that I felt were below value...

 Not a problem, bud. These older ones are a little bit different, that's for sure. ;D
Ethan

1972 Chevelle

(oo______oo)

Offline Mr.Pontiac

  • Qjet Hero
  • *****
  • Posts: 544
Re: Help! 1968 Pontiac Rochester
« Reply #4 on: February 20, 2017, 10:21:40 AM »
I may have that choke set-up if needed.

Offline Ethan1

  • Moderator
  • Qjet Hero
  • *****
  • Posts: 1148
Re: Help! 1968 Pontiac Rochester
« Reply #5 on: February 20, 2017, 03:50:06 PM »
I may have that choke set-up if needed.

 If you have it, you saved someone once again! 8)
Ethan

1972 Chevelle

(oo______oo)

Offline unruhjonny

  • Carb lover
  • ***
  • Posts: 87
Re: Help! 1968 Pontiac Rochester
« Reply #6 on: February 21, 2017, 11:20:52 AM »
If you have it, you saved someone once again! 8)

Well, I emailed him on the 10th, and have yet to hear a reply...

Hopefully I hear from him :)

Offline Mr.Pontiac

  • Qjet Hero
  • *****
  • Posts: 544
Re: Help! 1968 Pontiac Rochester
« Reply #7 on: March 05, 2017, 05:00:23 PM »
yes i have one!!

Offline unruhjonny

  • Carb lover
  • ***
  • Posts: 87
Re: Help! 1968 Pontiac Rochester
« Reply #8 on: March 05, 2017, 08:30:58 PM »
yay!!

I emailed you.

I will also be interested in some other parts if you have them too... and one thing I haven't mentioned previously.