« previous next »
Pages: [1]   Go Down

Author Topic: Q-Jet 17057274  (Read 3908 times)

Offline beertracker

  • Carb lover
  • ***
  • Posts: 72
Q-Jet 17057274
« on: May 10, 2010, 08:22:05 PM »
Hi:

I am rebuilding this carb with kit purchased from Cliff and I have a couple of questions. 

What is the float height for this carb?

Is this a 800 CFM carb?

Thanks,
BT  :)
Logged

Offline beertracker

  • Carb lover
  • ***
  • Posts: 72
Re: Q-Jet 17057274
« Reply #1 on: May 11, 2010, 12:00:40 PM »
Here is some more data for the above carb.  The engine is a Pontiac 400, 6x-4 heads milled .040", Summit 2802 cam, calculated compression ratio 8.9:1 using online compression ratio calculator, Summit headers, auto trans.  I believe Cliff sent .037 or .038 idle tubes with the rebuild kit.  Need to know what float height to use.

BT
Logged

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5418
Re: Q-Jet 17057274
« Reply #2 on: May 13, 2010, 05:27:24 AM »
Set the float at exactly 1/4" at the "toe".

That is the same carb number I use on my own engine, excellent unit, large cfm model.....Cliff
Logged
Pages: [1]   Go Up
« previous next »