General Category > Quadrajet Carb Talk and Tips

17059286 0977 marine carb

(1/5) > >>

Hotrodssnova:
I tried to post about this carb back when the site crashed and, here I am again. Bought a marine 350 from pan to carb, completely rebuilt now.
Specs:
9.1:1 compression
Stock dual plane intake
Cam is a .470 lift on 110 lobe centers
Duration is 275 intake/ 285 exhaust
At 0.050.    221 intake/ 231 exhaust
Exhaust will be 15/8" headers thru mufflers
Gearing is 3.56 front and rear with 31" tires
This is going in a 81 jeep cj5 with a 4 speed manual transmission

I was thinking a stock rebuild on the carb should work good. I read here that cliff dropped one on his ventura, and ran perfectly.

Thoughts?

Hotrodssnova:

Frank400:
Won't exactly be a stock rebuild but if you buy your parts from Cliff, he'll guide you thru what needs to be done to the carb to make it work right with your combo.

   With that cam, one thing's for sure, the idle system will need to get addressed.  You'll need to remove the idle tubes for sure.

    Frank.

Hotrodssnova:
Thanks, Frank.  I haven't opened the carb yet. Might tackle that tomorrow.

Hotrodssnova:
After a ton of reading here, how can I tell if this is a reman carb or original? I still haven't had the time to take it apart yet.

Navigation

[0] Message Index

[#] Next page