General Category > Quadrajet Carb Talk and Tips

Acell. discharge holes on airhorn have me confused

(1/1)

Mr.Pontiac:
I see where they are no problem , why i am confused is you have a small hole then a slot then the continuing hole. Does the fuel only come out of center slot area only???? explain please, opening them up on both sides of the slot or just one???

Cliff Ruggles:
If you are talking about the primary accl pump discharge holes they are located deeper into the casting on the inner partition.  The holes are very tiny, usually around .026" or so.  In most cases no need to open them up much further and no need to open up the holes in the outer partition.....Cliff

Mr.Pontiac:
Thank You, Cliff, i miked my drill at .022 and barely goes in. opening up to .026.

Cliff Ruggles:
Keep in mind that the hole size controls duration with any given pump length.

Smaller holes will have longer duration of the pump shot, larger holes will dump the accl pump fuel sooner.......Cliff

Navigation

[0] Message Index