« previous next »
Pages: [1]   Go Down

Author Topic: Quadrajet Specifications  (Read 1904 times)

Offline Spanky1205

  • Newbie
  • *
  • Posts: 2
Quadrajet Specifications
« on: July 23, 2018, 08:33:38 AM »
My one question for now is, where is everyone going to figure out the factory specifications for their quadrajet?  I am having problems with my truck running rich at cruise.  I do not want to start changing things without knowing if I have the correct parts to begin with.

The number on the quadrajet is 17082226.  The primary metering rods are 41J and the jets are 74.  I have not fooled with adjusting the secondary rods so I did not think to write down any information on those.   

I bought Cliff's book and have been reading it as well.   

Thanks for any help you maybe able to provide.
Logged

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5403
Re: Quadrajet Specifications
« Reply #1 on: July 24, 2018, 03:08:19 AM »
That carburetor needs our 50C rods with the full tapered upper section and .036" tips, and no doubt it is rich everyplace with J rods in it.....Cliff
« Last Edit: July 31, 2018, 08:30:14 PM by Cliff Ruggles »
Logged

Offline Spanky1205

  • Newbie
  • *
  • Posts: 2
Re: Quadrajet Specifications
« Reply #2 on: July 30, 2018, 07:13:49 AM »
Quote from: Cliff Ruggles on July 24, 2018, 03:08:19 AM
That carburetor needs our 50C rods with the full tapered upper section and .036" tips, and no double it rich everyplace with J rods in it.....Cliff

Are the rods sold in pairs or each?  I started to order them this morning but wanted to make sure before I sent in the order.

Thanks again,
Logged

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5403
Re: Quadrajet Specifications
« Reply #3 on: July 31, 2018, 08:30:51 PM »
Yes, sold in pairs and your order shipped out today......tks.....Cliff
Logged
Pages: [1]   Go Up
« previous next »