Quadrajet Problem Solving > Diagnose a Quadrajet carburetor problem

nozzle drip only on one side

(1/1)

lightning boy:
69 camaro street car. 383 dual plane, hyd roller cam 284 adv. dur. 510 lift 112 lsa. 10:1 cr, dart 200cc pro 1 platinum head.

carb# 17058218      71 jet/44 rod .046 drive in main air bleeds (thanks Cliff), float 9/32, idle airbleed upper .069, lower .077, idle tubes .036, down channel .55, bypass air .69, idle screw .80
I hanger and CH sec. rods.

I have control of the mixture screws, but getting nozzle drip from the driver side only. Idle at 750 RPM 14* initial timing. runs great, I never thought I had a problem until I had the breather off and notices the nozzle drip. any thoughts?

Cliff Ruggles:
Have you verified the throttle shaft isn't twisted and/or that the throttle plates aren't bent and both closing exactly at the same time?.....Cliff

Navigation

[0] Message Index