« previous next »
Pages: [1]   Go Down

Author Topic: Idle Air Bypass  (Read 1714 times)

Offline ChevyZ06

  • Newbie
  • *
  • Posts: 4
Idle Air Bypass
« on: November 13, 2018, 01:05:10 PM »
I am working on a 1969 Q-jet on a 454.  I am trying to increase the air around the throttle plate and keep the correct angle. I have located the ports in the base plate and the body but I am not sure exactly where they are restricted in the top. Does any have a picture of the IAB restrictions?  Thanks
Logged

Offline 77cruiser

  • Qjet Hero
  • *****
  • Posts: 628
Re: Idle Air Bypass
« Reply #1 on: November 13, 2018, 03:10:23 PM »
How big are the ports in the base? That's where the restriction is.
Logged
Jim

Offline ChevyZ06

  • Newbie
  • *
  • Posts: 4
Re: Idle Air Bypass
« Reply #2 on: November 13, 2018, 03:20:22 PM »
I will have to check. From memory I think .080
Logged

Offline ChevyZ06

  • Newbie
  • *
  • Posts: 4
Re: Idle Air Bypass
« Reply #3 on: November 15, 2018, 11:29:08 AM »
Guys please take a look at this video and tell me if you think that this can be caused by anything other than what I think it is. Thank you

https://www.youtube.com/watch?v=GYZPl4_2_z0
Logged

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5435
Re: Idle Air Bypass
« Reply #4 on: November 16, 2018, 02:57:00 AM »
What is the carburetor number?

Why do you think it needs more idle bypass air?

Nozzle drip at idle?

Control with the idle mixture screws?
Logged

Offline ChevyZ06

  • Newbie
  • *
  • Posts: 4
Re: Idle Air Bypass
« Reply #5 on: November 16, 2018, 10:02:23 AM »
7029207...  Its on a 454 and I am having idle problems.  Cover the air horn and the idle gets better.  Ithink my throttle is open too far.
Logged

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5435
Re: Idle Air Bypass
« Reply #6 on: November 17, 2018, 05:10:12 AM »
It's probably a Service Replacement 7029207 and they were set-up/calibrated for the 350/350HP manual transmission engines.

They can be effectively used for big block applications, but you will need a few parts and slight modification to the idle system.

When you get time call the shop, we'll need the cam specs, compression of your 454 and can help out from there.......Cliff
Logged
Pages: [1]   Go Up
« previous next »