« previous next »
Pages: [1]   Go Down

Author Topic: Power Piston Spring ID  (Read 1527 times)

Offline Tuffnut

  • Garage guy
  • **
  • Posts: 8
Power Piston Spring ID
« on: January 22, 2019, 05:47:31 PM »
I purchased a kit from Cliff's. My 350 is running 16-17" vacuum at idle. Which spring color should I start with?
I should use a spring half my vacuum? Which color would this spring be as no ID came with them.

Thanks

Jeff
Logged

Offline Sonny

  • Carb lover
  • ***
  • Posts: 53
Re: Power Piston Spring ID
« Reply #1 on: January 22, 2019, 07:46:52 PM »
Logged

Offline Tuffnut

  • Garage guy
  • **
  • Posts: 8
Re: Power Piston Spring ID
« Reply #2 on: January 23, 2019, 07:33:12 AM »
Thanks Sonny, with 17" vacuum at idle and a heavy car 75 Supreme Cutlass with an 200R4 Over drive tranny with 3:42 gears, I would think I should be trying the 10" first. Always go back the 8" if needed.

Thoughts?

Jeff
Logged

Offline tayto

  • Carb lover
  • ***
  • Posts: 205
Re: Power Piston Spring ID
« Reply #3 on: January 23, 2019, 02:15:29 PM »
i have a black spring in my kit, is that the heaviest spring?
Logged

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5418
Re: Power Piston Spring ID
« Reply #4 on: January 24, 2019, 03:22:30 AM »
No black spring in our kit, but there is a dark blue and it is the strongest spring in there.  I'd use the dark blue one for what you are doing......Cliff
Logged

Offline Tuffnut

  • Garage guy
  • **
  • Posts: 8
Re: Power Piston Spring ID
« Reply #5 on: January 24, 2019, 07:34:09 AM »
Thanks Cliff, I'm excited to try the kit you sent me.


Jeff
Logged
Pages: [1]   Go Up
« previous next »