Quadrajet Problem Solving > Diagnose a Quadrajet carburetor problem
Got my carb back and choke stays on fast idle
benbuff:
I got my carb back from cliff and installed it. Starts right up but even with the engine hot it stays on fast idle. My question is theres a vacuum looking port coming off the front of the choke housing, is it supposed to have vacuum? Its just open now. Its an electric choke with 12 v power running to it. Thanks, Ben
Frank400:
The choke is adjustable as for "how long" it stays on. If you loosen up the three screws holding the electric choke unit and turn it a bit clockwise, that should shorten the time it stays on.
Are you positive you have 12 v to the choke while the ignition switch is on ? I'm guessing you do but never a bad idea to double check.
What is the carb number ?
benbuff:
I'll have to look I don't remember. It is on a 79 k5 blazer if that helps. I checked it with a test light, but didn't actually test it to see how many volts. It worked before I had it rebuilt.
Cliff Ruggles:
We test them before shipping to verify the choke works with a 12 volt source, and dial in all the basic settings.
Haven't had any defective electric chokes to date, but if we installed a new one an you can verify it isn't heating up we'll replace it on our dime......Cliff
benbuff:
Is the port coming off the front of the choke housing supposed to be open?
Navigation
[0] Message Index
[#] Next page
Go to full version