General Category > Quadrajet Carb Talk and Tips

B stamped primary rods

<< < (2/3) > >>

Cliff Ruggles:
No, the travel or "range" of the power piston is based on the shorter rods.  The longer ones are still too long and don't raise up far enough when the PP is at the top of it's travel....

mcx:
Thanks for the clarification. I'll  stick with the correct short versions.

Cliff Ruggles:
We sell two metering rods for the later APT units that use the shorter versions.

Our 50C rod tapers from .050" to .036" and the 44 rods taper from .044" to .026".

I also sell "B" series rods in .039", .042", .043" and .044".....Cliff

mcx:
...I just placed an order for those custom rods ..and a gasket!  Thank you.

Cliff Ruggles:
Got it...tks...

Navigation

[0] Message Index

[#] Next page

[*] Previous page