General Category > Quadrajet Carb Talk and Tips

NEW EDELBROCK CARB

(1/2) > >>

qjetsrule:
EDELBROCKS NEW 750

https://www.enginelabs.com/engine-tech/engine/inside-the-new-edelbrock-vrs-4150-four-circuit-carburetor/

Cliff Ruggles:
I saw that recently on the Corvette Forum.

Looks like Edelbrock has taken many of the flaws and things lacking with the Holley design and added and improved them.

Too bad they couldn't do anything with the accl pumps on the bottom of the bowls (very dangerous leak point) and the 10 or so other places they can leak below the fuel level.........

qjetsrule:
I cringe when I see a GM musclecar with a Holley slapped on it.

Cliff Ruggles:
I cringe when I see the cut factory metal fuel line and rubber hose/clamps used to install aftermarket carburetors.  They don't even take the time to put a "bulge" in the metal line to keep the hose from slipping off.....very dangerous!......

Brian B.:
X2!  Especially when it is so easy to bend and flare NiCopp line.

Navigation

[0] Message Index

[#] Next page