« previous next »
Pages: [1]   Go Down

Author Topic: Wanted - APT Spring Clip  (Read 2245 times)

Offline Shiny

  • Carb lover
  • ***
  • Posts: 78
Wanted - APT Spring Clip
« on: February 01, 2023, 09:33:23 AM »
Can anyone supply the APT spring clip found in the base of a 4MV Qjet?

It is part "B" in the image.

Used is expected, just need one in good shape and with original profile.  The clip is formed from square-profile wire.

Thanks,

Mike
Logged

Offline Shiny

  • Carb lover
  • ***
  • Posts: 78
Re: Wanted - APT Spring Clip
« Reply #1 on: February 12, 2023, 08:39:32 PM »
Guess they are scarce!

Mine is worn or corroded about half-through the bottom leg but still functional.  It is sticking above the base a little, left a witness mark in the gasket.

I guess I'll try forming something close out of music wire.
Logged

Offline Shiny

  • Carb lover
  • ***
  • Posts: 78
Re: Wanted - APT Spring Clip
« Reply #2 on: February 16, 2023, 08:20:51 PM »
You can see my old spring is almost worn through from rubbing against the adjuster screw.  It was also deformed from the wrestling match to remove it a few years back.

I was able to bend something close to the right shape from 0.050" music wire.

It seems to fit OK and I think it will work.
Logged
Pages: [1]   Go Up
« previous next »