Quadrajet Problem Solving > Diagnose a Quadrajet carburetor problem

Did they mix the parts ?

<< < (3/3)

Erick:
There is something strange with the camshaft code. 25 years later i still have the original bos wit the old camshaft inside. So I checked again, it's printed H-206-2 but also 113901 and with that number I find following specifications for a small block
Camshaft - Hydraulic Flat Tappet - Lift 0.427 / 0.454 in - Duration 260 / 272 - 112 LSA - 1200 / 5000 RPM - Small Block Chevy
So first time I pick-up wrong specs with tipping only H-260-2...

Kenth:
Camshaft Part-#113901 with the H-260-2 grind.

https://www.summitracing.com/parts/crn-113901

Erick:
That's right.

Cliff Ruggles:
My advice would be to obtain an unmolested core and ditch the remanufactured unit and chalk it up to experience.  I woln't touch any of those here, and neither will Lars, and for good reason.  The miss-matching and "butcher" job they recieve make it difficult, and sometimes near impossible to get a good end result.  Even if you do the time/funds spent far exceed simply getting a good core and complete/correct rebuild kit and put your efforts there in the first place......FWIW.....

Navigation

[0] Message Index

[*] Previous page