General Category > Quadrajet Carb Talk and Tips

17057512 factory specs

(1/2) > >>

Cadman-iac:
  I need all the factory settings/ specs for this please.  I want to return it to original if possible.

 Thanks

GSP7:
Did you find the specs info data?

I cant find the data spec pages for all the carb numbers now either

Kenth:
Here is what i have on the 17057512:

Cadman-iac:
Thanks Kenth, much appreciated.

 What would the federal version of this have then? Would you happen to have that as well?
 It's going to be put on a 78 454 that's all stock other than having been rebuilt with  .030 oversize pistons. I didn't realize this was a California carb.
  Thanks again.

 Rick

 Edit:  I noticed that it lists the main nozzle size for this, aren't those all the same? I've never thought to check them before.
 Can these be changed or are they permanently mounted and what you get is it?

Kenth:
Main circuit nozzle air bleed at the end of yellow arrow. It is the same for all Chevy Q-jets.

As for the nozzle brass inserts there is different sizes for just about every manufacturer and even for certain applications that determins what jetting to be used.

Navigation

[0] Message Index

[#] Next page