General Category > Quadrajet Carb Talk and Tips

I need the stock specs for a 17050213.

(1/6) > >>

Cadman-iac:
  I'm gonna try one more carb on this truck, but I want to make sure it's set up exactly like it was when it left the factory.
  Can someone please supply the stock specifications for this 17050213 please?
 Many thanks for your help, Rick.

Cadman-iac:
 I mistyped the carb number, it should be a 17080213. Thanks

mcx:
I don’t have the official book but have overhauled a few:
Primary jet 72
Primary rod 50M
Secondary rod DP

novadude:
I've got them for a 17082213.  This was a "rear pull-off" carb that I pulled off a '82 Suburban in a junkyard.  It looked original and did not appear to be a remanufactured carb, but I cannot guarantee it.  I don't know if specs changed from 1980 to 1982 for a '213' carb?  I rebuilt it pretty much stock with just minor tweaks (secondary metering rods, and POE sizes) and ran it on a mild 396 for a while.  Seemed to work OK. 

Here is what I measured for stock specs:

Cadman-iac:

--- Quote from: mcx on November 17, 2025, 11:05:42 AM ---I don’t have the official book but have overhauled a few:
Primary jet 72
Primary rod 50M
Secondary rod DP

--- End quote ---
  Thanks for the information, I see that my jets and rods are a match, my secondary rods are aDR though,  not sure if there's much difference, gotta check Cliff's  chart.
 Much appreciated.

Navigation

[0] Message Index

[#] Next page