« previous next »
Pages: 1 [2]   Go Down

Author Topic: APT adjustment screw adjust to smaller or larger jet sizes  (Read 14910 times)

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5541
Re: APT adjustment screw adjust to smaller or larger jet sizes
« Reply #15 on: October 11, 2025, 01:10:36 AM »
I'd go to .074" main jets and test again.  It's telling you that it wants a little more metering area since you have the power piston adjusted to full height and not quite getting the desired results.....
Logged

Offline GSP7

  • Carb lover
  • ***
  • Posts: 102
Re: APT adjustment screw adjust to smaller or larger jet sizes
« Reply #16 on: November 24, 2025, 12:10:08 PM »
Quote from: Cliff Ruggles on October 11, 2025, 01:10:36 AM
I'd go to .074" main jets and test again.  It's telling you that it wants a little more metering area since you have the power piston adjusted to full height and not quite getting the desired results.....

Thanks... That is exactly what I was asking about

.
Logged
Idaho
Pages: 1 [2]   Go Up
« previous next »