General Category > Quadrajet Carb Talk and Tips

Carb ID

<< < (2/2)

pggto:
I'm not using a shaker this is for a GTO engine, and I think it will interfere with my air cleaner. So if I use this carb I would need to put a hole in the air cleaner base to clear this tube? I'm using an aftermarket aluminum air cleaner.

4speed:
or find a olds 403 carb.   or cut the tube , Ive seen that. but would hate to see that happen to that carb.
but the tube should be up in the air cleaner so dirt wont get into your carb.

Cliff Ruggles:
The vent tube MUST extend inside the air cleaner base, or it will vent to the outside (dirty) air.  A corresponding hole is required, and sealed up to keep dirt out of the engine, just like the factory set-ups.....Cliff

pggto:
4Speed, I sent you a PM

4speed:
email and PM'ed ya back. 

Navigation

[0] Message Index

[*] Previous page