idle tubes

[17058263]

can you remove the lower restriction of the idle tube and just have the tube only one size

[Cliff Ruggles]

The holes would be over .050", and enough idle fuel for a Pro Stock drag racing engine!

The largest idle tubes I've ever had to use were .042", and very seldom go past .038".  Much easier to reduce the idle airbleed sizes to put more fuel to the idle system instead of all that emulsion air.....Cliff

[17058263]

carb is for a 79 301 stock down channel idle tubes are at .052  72 jets 44 custom rods. green pp spring. would not idle well at smaller setting. pulls 18 vaccum at idle plugs looklight tan main air blees .065 it would run with .045 idle tubes. with stock .038 had to choke it would die. pontiac 301 60 over. redone by motor works 6 years ago. i cant fuger out why it wants so much fuel at idle . it also has a real nice tone.  and eats tires. tun them into powder. any help would be great runs great ohther wise. just a small miss when it get over 200 temp/ does idle smooth in gear. runinng 89 to

[17058263]

got some more idle tubes drilled them to 0.42 gonna put them in and see how it goes

[Cliff Ruggles]

I only use .038" idle tubes in my Pontiac carb, feeding a 455 with nearly 600hp!......Cliff

[17058263]

ok put them in runs just fine smotth in gear 550 750 out 2.5 turns out mixture evem smells lean at idle and clean.