« previous next »
Pages: [1]   Go Down

Author Topic: secondary airflap question.  (Read 2065 times)

Offline firebird*boz

  • Garage guy
  • **
  • Posts: 8
secondary airflap question.
« on: June 25, 2011, 02:56:29 AM »
hello all,

woundering what size the 4 x taped threads are in the secodary air flap?
( the screws that hold the 2 x airflaps to the shaft)

 it seems I have broken  the head off one of the screws that screw into the shaft; in trying to remove the screws.....

now need to re-drill & tap new thread.

thanks boz...
Logged

Offline Schurkey

  • Carb lover
  • ***
  • Posts: 157
Re: secondary airflap question.
« Reply #1 on: June 25, 2011, 06:45:53 AM »
Aren't those screws staked on the underside?

I bet you can grab the "bottom" end, and thread them out from the other
side.
Logged
Demand compensation from Communist China for the damage done by the Virus Originating in the Wuhan Lab, released (intentionally or negligently) into the world in 2019 (VOWL-19).  Trillions of dollars, plus direct compensation to individuals for medical bills, and "wrongful death" settlements.

Offline firebird*boz

  • Garage guy
  • **
  • Posts: 8
Re: secondary airflap question.
« Reply #2 on: June 25, 2011, 09:54:52 PM »
yes, correct they are staked... but there is not enough of the screw through the other side to get a hold of... so it looks like i'll need to re-drill & tap..
Logged

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5435
Re: secondary airflap question.
« Reply #3 on: June 26, 2011, 05:16:32 AM »
Choke flap and secondary airflap screws are #6-32's.  We have the correct length and style fasteners in our kits.  They can be opened up to 8-32 if you get in trouble there, we stock those as well.......Cliff
Logged
Pages: [1]   Go Up
« previous next »