« previous next »
Pages: [1]   Go Down

Author Topic: choke probs  (Read 2035 times)

Offline F250 Restorer

  • Carb lover
  • ***
  • Posts: 101
choke probs
« on: November 07, 2011, 08:50:38 PM »
Okay, I'm still dialing in my carb, but noticed the choke is not working right.  I have a 17058524.  The single diaphram vacuum that prevents the air flaps from opening ... it pulls so much that the lever on the shaft can not counteract it.  Am I missing something?  With the engine fully warm, I would have to turn choke c.clockwise to trip/move the diap. rod enough to allow the air flap to open.  I thought that as the choke warms it would move and push back the rod, but the opposite is true.

I need a bit of help from someone experienced.
Logged

Offline F250 Restorer

  • Carb lover
  • ***
  • Posts: 101
Re: choke probs
« Reply #1 on: November 08, 2011, 11:12:09 AM »
I was hoping to get a bit of help from someone, but I guess that may not be the case.
Logged

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5403
Re: choke probs
« Reply #2 on: November 09, 2011, 04:16:46 AM »
The choke pull-off unloads the choke on cold starts.  The later models use an adjustable pull-off to set the choke flap angle on initial start-up.  It may take several cold start attempts to find the ideal setting.....Cliff
Logged
Pages: [1]   Go Up
« previous next »