« previous next »
Pages: [1]   Go Down

Author Topic: Need kit and parts for 17086047  (Read 3593 times)

Offline kenn

  • Carb lover
  • ***
  • Posts: 64
Need kit and parts for 17086047
« on: June 30, 2013, 12:48:58 PM »
Hello, I am attempting to complete this rebuild for the engine in my 72 C10 the eng is 350+30, performer intake,202 heads,224/230/110 cam. I know I need the idle tubes,secondary jets, rods and hanger and the rebuild kit.  The jets that were in it were 74s. If I should use a different size include them. I think I should use new rods here also. I am not sure whats in the kit as far as screws and springs.
Some of the measurements are:   Idle down channel   .051
                                                      Upper idle air bleed  .046
                                                      Lower idle air bleed  .076
                                                 Main air bleed in air horn .086
                                                     Mixture screw holes    .0625
  Thanks for the help.

Logged

Offline Shark Racer

  • Jet Head
  • ****
  • Posts: 288
Re: Need kit and parts for 17086047
« Reply #1 on: June 30, 2013, 05:26:59 PM »
Fastest way to get this taken care of is to call the shop... and Cliff is awesome to talk to. :)
Logged

Offline Ethan1

  • Moderator
  • Qjet Hero
  • *****
  • Posts: 1148
Re: Need kit and parts for 17086047
« Reply #2 on: June 30, 2013, 07:39:50 PM »
Quote from: Shark Racer on June 30, 2013, 05:26:59 PM
Fastest way to get this taken care of is to call the shop... and Cliff is awesome to talk to. :)

 What Steve said. Cliff is a GREAT guy to talk to. He will help you greatly with what you need for your carb. ;)
Logged
Ethan

1972 Chevelle

(oo______oo)

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5418
Re: Need kit and parts for 17086047
« Reply #3 on: July 02, 2013, 04:37:03 AM »
Kits are best ordered by calling the shop, that's why we don't offer them directly off the website.  In most cases we put custom kits together exactly for the application....Cliff
Logged

Offline kenn

  • Carb lover
  • ***
  • Posts: 64
Re: Need kit and parts for 17086047
« Reply #4 on: July 02, 2013, 09:52:45 AM »
Hello.  I'll call today when I get home from work. I'm just a guy rebuilding a carb for my daily driver I dont race or anything like that.
Logged

Offline kenn

  • Carb lover
  • ***
  • Posts: 64
Re: Need kit and parts for 17086047
« Reply #5 on: July 16, 2013, 07:41:36 AM »
Hello I talked to cliff about the parts that I needed and they were sent right out. He is a very busy man but willing to help with what I needed. Now I have to start putting this together, I hope I can remember where to put the restrictions he sent.   Thanks K.E.N.
Logged

Offline Ethan1

  • Moderator
  • Qjet Hero
  • *****
  • Posts: 1148
Re: Need kit and parts for 17086047
« Reply #6 on: July 16, 2013, 08:34:58 PM »
Quote from: kenn on July 16, 2013, 07:41:36 AM
Hello I talked to cliff about the parts that I needed and they were sent right out. He is a very busy man but willing to help with what I needed. Now I have to start putting this together, I hope I can remember where to put the restrictions he sent.   Thanks K.E.N.

 Cliff's the man! 8)
Logged
Ethan

1972 Chevelle

(oo______oo)

Offline kenn

  • Carb lover
  • ***
  • Posts: 64
Re: Need kit and parts for 17086047
« Reply #7 on: July 18, 2013, 03:14:29 AM »
I am so confused by the air bleeds I hope I got this right...
Logged

Offline kenn

  • Carb lover
  • ***
  • Posts: 64
Re: Need kit and parts for 17086047
« Reply #8 on: July 25, 2013, 01:50:34 PM »
Well I think I got it correct but I'm missing the link for the front pull-off. One other thing the directions with the kit were no help at all. Good thing the library is up the street.
Logged
Pages: [1]   Go Up
« previous next »