« previous next »
Pages: [1]   Go Down

Author Topic: JEt Q-jet  (Read 2028 times)

Offline 73ss

  • Carb lover
  • ***
  • Posts: 121
JEt Q-jet
« on: February 09, 2012, 05:57:47 PM »
Cliff or anyone ever mess with a jet streetmaster q-jet.

I picked one up at a swap meet. It was dropped and is good for parts. I took it apart and it has the large .120" main air bleeds in the air horn & main body. 73 jets & 41K rods. This seems lean with the large bleeds? also has small idle screw holes. Other than that it appeared to be put together well. Has a phillips screw for apt adj.

 http://www.summitracing.com/parts/JET-35001/
Logged

Offline Cliff Ruggles

  • Administrator
  • Qjet Hero
  • *****
  • Posts: 5418
Re: JEt Q-jet
« Reply #1 on: February 10, 2012, 04:55:23 AM »
I see a LOT of those.  I'll reserve my comments on them.  Looking at what's going on with the calibration, it's pretty obvious how it's going to work....Cliff
Logged
Pages: [1]   Go Up
« previous next »