General Category > Quadrajet Carb Talk and Tips

JEt Q-jet

(1/1)

73ss:
Cliff or anyone ever mess with a jet streetmaster q-jet.

I picked one up at a swap meet. It was dropped and is good for parts. I took it apart and it has the large .120" main air bleeds in the air horn & main body. 73 jets & 41K rods. This seems lean with the large bleeds? also has small idle screw holes. Other than that it appeared to be put together well. Has a phillips screw for apt adj.

 http://www.summitracing.com/parts/JET-35001/

Cliff Ruggles:
I see a LOT of those.  I'll reserve my comments on them.  Looking at what's going on with the calibration, it's pretty obvious how it's going to work....Cliff

Navigation

[0] Message Index